Finger-jointed boxes
Type the size, material thickness and kerf; BoxForge draws every panel with matching finger joints, inside or outside dimensions, and keeps the joints consistent when you change anything.
What it does
Lids, hinges and features
Fixed, removable, lift-off and sliding lids. Living-hinge corners, open faces, handles, holes and ventilation slots. Ten ready-made templates to start from.
Artwork and photos
Engrave text, imported SVG or photos onto any face. Keep-out zones stop you from engraving through a joint.
Beds and nesting
Parts are packed onto as many beds as your laser needs. Drag, pin and rotate parts, or freeze the layout and arrange it by hand in the enlarged view.
SVG and GRBL G-code
One SVG and one G-code file per bed, with separate pass counts for cutting and engraving, or an engrave file and a cut file per bed. Preview everything in LightBurn, LaserGRBL or your usual software.
Check before you burn
3D preview of the assembled box, a printable paper mock-up at 1:1, structured diagnostics, and an export dialog that makes you confirm feeds and powers.
A look at the app
Read this before you cut anything
BoxForge writes files; your laser does the dangerous part. The same notice appears when you first open the app, and you can reopen it from the status bar at any time.